Sirius DP 55 – 70 – 80

Chutes and Equipment

• 300° swivel single chute with manually adjustable distribution slide
• Distribution/bedding chute with 30° forward and rearward pivot on the right-hand side chute (overall width: 2.55 m)
• 60° side chute (requires the 30° forward and rearward pivoting distribution/bedding chute on the right-hand side, overall width: 2.55 m)
• Hydraulic cylinder for the chute deflector (side chute or single chute)
• +25 cm single chute extension (mandatory when fitted with a mixer)
• Mixing net
• Mixing kit including mixing net, 300° single chute, chute extension, hydraulic chute deflector and two loosening rotors – non-modifiable kit
• Hydraulic adjustment of the distribution slide

Platform

• Silage loading platform with dual 4-function electric controls (lifting arms, grapple, moving floor and axle)

Mechanical Drive

• Second mechanically driven loosening rotor with fixed regulating comb
• J-DRIVE disengageable loosening rotor system
• Oil-bath multi-disc clutch for the mechanical drive of the loosening rotor

Wrapped Bale Distribution

• Wrapped silage bale distribution kit (+15 rotor blades and +3 fixed retainers) for one loosening rotor
• Wrapped silage bale distribution kit (+30 rotor blades and one regulating comb) for two loosening rotors

Hydraulics

• Hydraulic drive for one or two loosening rotors with fixed regulating comb
• Second loosening rotor with hydraulic motor (hydraulic power pack recommended for tractors with a flow rate below 30 L/min)
• One hydraulic motor on the rotor: +25% power
• Two hydraulic motors on the rotors: +25% power
• Hydraulic oil filter
• 50 L/min hydraulic power pack with electric gearbox shift control (for tractors with hydraulic flow below 30 L/min)
• Hydraulic power pack for hydraulic rotor drive

Weighing System

• DG500 weighing system with 3 load cells, 48 programmes and 18 ingredients, including audible alarm (2 load cells on the axle and 1 on the drawbar)

Miscellaneous

• Front mixing hopper with fixed drawbar, 500 L capacity, electric gearbox shift control for the straw blower
• Warning: fitting a hopper increases the overall machine length
• Weighing system for hopper
• Electric gearbox shift control on the turbine control box
• Work light
• Long drawbar with manual parking stand, without hitch bar (clevis hitch)
• Articulated drawbar
• Hydraulic articulated drawbar
• Articulated drawbar for machines fitted with a hopper
• Nitrogen accumulator on the axle (recommended for frequent road transport)
• Misting system with 4 nozzles and 80 L tank
• 10/75 × 15.3 spare wheel
• 11.5/80 × 15.3 spare wheel
• Half wide-angle PTO shaft with guard on the tractor side