Energy 4P

Vertical mixers | Marque : Jeulin

The latest addition to the range, this mixer wagon is ideally suited to medium-sized livestock farms. Compact, with a low profile and narrow overall width, it features an independent chassis and requires only modest tractor power. Its augers overlap using the exclusive J-FLOW system, ensuring complete discharge of the mixing tub and a perfectly homogeneous mix, even with small feed batches.

Download the brochure

Are you interested in this model?

Contact ou sales representatives

In France

Contact ou sales representatives

Internationally

Technical specifications

ENERGY 4P 14 ENERGY 4P 16 ENERGY 4P 18 ENERGY 4P 20ENERGY 4P 22
A - Longueur hors tout (m)*6.406.406.456.506.5
B - Hauteur hors tout (m)2.602.772.853.053.27
C - Largeur hors tout (m)2.4542.4892.5242.5432.573
Volume de cuve (m3)1416182022
Nombre de vis22222
Nombre de couteaux7×27×27×27×27×2
Nombre de pesons44444
Nombre d'essieux1×901×901×901×901×90
Transmission88888
Largeur aux roues (m)1.9652.1452.1452.1452.145
Pneumatiques445/50R 19.5
Poids à vide (kg)51005130518052005280
*si tapis longueur hors tout +0.9 m

Mixing & Feeding

  • Vertical conical mixing auger fitted with 7 knives, including 5 adjustable attack-angle knives, and one adjustable scraper
  • PTO speed 540 rpm = auger speed 22 rpm / 1000 rpm = auger speed 40 rpm
  • Conical top ring with integrated anti-spillage ring
  • Fibre retention ring
  • Fully enclosed oil-bath epicyclic gearbox with right-angle drive, maintenance-free (no grease nipples), featuring a 4-litre oil reservoir
  • Two manually adjustable vertical counter-knives
  • Front right-hand or rear left-hand tangential discharge door
  • Front left inspection ladder (or rear centre ladder with front cross conveyor)
  • J-FLOW overlapping auger system
  • Tungsten carbide-coated knives with anti-breakage supports
  • Smooth rolled mixing tub manufactured in two sections to minimise welds and maximise structural strength
  • 4-load cell version: Independent weighing chassis with four load cells and conical mixing tub

Design & Safety

  • Tubular chassis
  • DG500 weighing system with four Ø54 mm load cells mounted on an independent chassis, offering 48 programmes, 18 ingredients, and audible alarm
  • Protective safety guards

Road Equipment

  • Parking brake and dual-line hydraulic braking system
  • Road lighting compliant with current road regulations
  • Manual parking stand
  • Drawbar with hitch ring
  • Rotating beacon
  • CE compliant and road approved

Driveline

  • PTO shaft with safety guard and machine-side PTO shield

Tractor Requirements

  • 540 rpm and 1000 rpm PTO
  • 12 V / 3-pin electrical socket for the weighing system
  • 12 V / 7-pin electrical socket for road lighting
  • One double-acting hydraulic spool valve for the discharge door
  • Hitch pin

FEEDING OPTIONS

  • Front bi-directional chain-and-slat cross conveyor, 800 mm wide (left or right discharge, 2-speed gearbox, inspection platform) (2 DA hydraulic services) – replaces side discharge door
  • Inclined cross conveyor, 800 mm wide, suitable for feed trough heights from 600 to 1,100 mm, with 300 mm hydraulic side shift
  • Hydraulic side shift of conveyor:
    • 300 mm to left or right
    • or 200 mm to left or right
  • Stainless steel conveyor, 800 mm wide
  • Flat PVC bi-directional conveyor, 800 mm wide, replacing chains and slats
  • Front “banana” chain-and-slat conveyor, 800 mm wide (left and right discharge, 200 mm hydraulic side shift, maximum discharge height 1 m, 2-speed gearbox, inspection platform)
  • Right-hand side PVC conveyor, 800 mm long × 1,100 mm wide, hydraulically adjustable inclination
  • Rear central discharge conveyor, 2.00 m long × 1.10 m wide, hydraulically raised by two cylinders, maximum discharge height 2.50 m
  • Rear “banana” chain-and-slat conveyor, 800 mm wide (left and right discharge, 200 mm hydraulic side shift, maximum discharge height 1 m)
  • Second rear left discharge door or alternative location (to be specified when ordering)
  • Inspection platform replacing the access ladder
  • Hopper for concentrate loading (rear-mounted)
  • Raised mixing tub for single-auger models (+300 mm height / +2 m³ capacity)
  • Raised mixing tub for twin-auger models (+300 mm height / +3 m³ capacity)

HYDRAULICS & ELECTRICAL

  • Two-speed gearbox
  • Electric control box for 2 hydraulic functions
  • Teleflex cable-operated gearbox shifting
  • Hydraulic gearbox shifting via tractor hydraulic valve
  • Electrically operated gearbox shifting (not available on models under 14 m³)
  • MOTEC camera with monitor
  • Additional MOTEC camera
  • Hydraulic side door flap
  • Manual flow control valve for discharge conveyor (one direction)
  • 2- or 3-function hydraulic selector with electric control (machines without conveyor)
  • Additional electric control station beside the conveyor
  • In-cab electric flow control for discharge conveyor
  • Hydraulic parking stand with hand pump

CUTTING SYSTEM

  • Additional manual vertical counter-knife
  • Two hydraulic vertical counter-knives replacing the manual version
  • Additional manual horizontal counter-knife
  • Additional hydraulic horizontal counter-knife
  • Two hydraulic counter-knives for root crops and tubers
  • Long straw knife extensions
  • Second scraper for single-auger models

WEIGHING SYSTEM

  • Wireless weighing remote control with display and antenna (DINA TEL 3), range up to 100 m
  • Remote control for electric distributor (maximum cable length 12 m, depending on the number of functions)
  • Wireless weight repeater
  • Battery charger for remote control
  • PC data transfer system (DATA TRANSFER)
  • Farm Chef smartphone application for remote programming of the weighing system
  • Wired weight repeater (installation position to be specified)
  • Hydraulic weighing lock for four load cells (recommended for extensive road transport)
  • Visual warning light replacing the audible alarm
  • Battery with connection cable

DRIVELINE

  • Half wide-angle PTO shaft (tractor side), Series 8 safety guard

SAFETY

  • Lower ferrite magnet for side door discharge
  • Lower ferrite magnet for conveyor discharge
  • Lower neodymium magnet for side door discharge
  • Lower neodymium magnet for conveyor discharge
  • Neodymium magnet beneath the auger flight (single-auger models), comprising three Ø33 × 300 mm magnetic bars
  • Rotating magnet
  • Upper magnet (conveyor-equipped models only)

TYRES

  • Two 400/60 × 15.5 tyres replacing 11.5/80 × 15.3
  • Spare wheel 445/50 R19.5
  • Four twin 8.15 × 15 wheels (200 × 710 mm), reducing overall height by 100 mm compared with 400/60 × 15.5
  • Four twin 8.15 × 15 wheels (200 × 710 mm), reducing overall height by 150 mm compared with 445/50 R19.5
  • Four twin 215/75 R17.5 wheels (219 × 779 mm), reducing overall height by 30 mm compared with 400/60 × 15.5
  • Four twin 215/75 R17.5 wheels (219 × 779 mm), reducing overall height by 70 mm compared with 445/50 R19.5
  • Two 445/50 R19.5 tyres (430 × 930 mm), increasing overall height by 70 mm compared with 400/60 × 15.5
  • Two 400/45 × 17.5 tyres, reducing overall height by 40 mm compared with 445/50 R19.5
  • Fixed bogie with four 445/50 R19.5 wheels (up to 24 m³), increasing overall height by 100 mm
  • Self-steering bogie with four 445/50 R19.5 wheels and hydraulic steering lock

MISCELLANEOUS OPTIONS

  • 20 mm reinforced floor
  • Hydraulic feed roller on side discharge door
  • Additional electric function on electric control box
  • Skid support replacing the parking stand
  • Hydraulic flap on front or rear side discharge door
  • Four-nozzle misting system with 80 L tank
  • 20 mm thick auger
  • Rear mudguards for bogie axle
  • Water incorporation pipe
  • 10 mm reinforced side panels (single-auger models)
  • 10 mm reinforced side panels (twin-auger models)
  • 10 mm reinforced side panels (triple-auger models)
  • 4 mm stainless steel liner for single-auger models (600 mm high around the mixing tub)
  • 4 mm stainless steel liner for twin-auger models (600 mm high around the mixing tub)
  • 20 mm first auger flight on 15 mm auger
  • 25 mm first auger flight on 15 mm auger
  • 25 mm first auger flight on 20 mm auger
  • Hardox auger
  • Electrically operated hydraulic parking stand
  • Restrictor for sheep barn conveyor

Photo gallery

Do you need information about a machine?

Contact our sales representatives

In France

Contact our sales representatives

Internationally

These machines might interest you

News

AND’AIR: JEULIN gets the windrow moving

AND’AIR: JEULIN gets the windrow moving

A belt windrow turner by JEULIN, designed to support a crucial stage of the harvesting process: drying Turning, moving, spreading, regrouping… These operations play a vital role in forage quality, helping to achieve fast and even drying. This is precisely where AND’AIR, JEULIN’s belt windrow turner, comes into its own. And it is 100% made […]

Read more
JEULIN Makes a Splash with the TRANSCAN

JEULIN Makes a Splash with the TRANSCAN

A New Benchmark for Sugar Cane On the occasion of the 46th Bras-Panon Agricultural Fair on Réunion Island, Jeulin SAS is making a strong impression with the launch of its brand-new trailer: TRANSCAN, specifically designed for transporting sugar cane. A launch right where it makes perfect sense Jeulin chose one of France’s most iconic sugar […]

Read more
JEULIN sales ANDERSON inline wrappers

JEULIN sales ANDERSON inline wrappers

The wrapping season is fast approaching! To ensure optimal conservation of fodder and meet the needs of breeders and farmers, JEULIN offers the Anderson Group’s range of inline wrappers, recognized for its reliability and unmatched performance. A true complement to the range of individual wrappers already offered, this system has several advantages over individual bale […]

Read more