Energy NGF

Vertical mixers | Marque : Jeulin

This machine has a unique lowered tank thanks to the recessed wheels between the mixing screws to gain height while maintaining a capacity of 14 to 21m³. Robust, versatile and precise thanks to the 3-point integrated chassis, it has been specially designed for fibre with its flared shape.

Download the brochure

Are you interested in this model?

Technical specifications

ENERGY NGF 14ENERGY NGF 16ENERGY NGF 18ENERGY NGF 21
A - Longueur hors tout (m)*6.256.256.256.29
B - Hauteur hors tout (m)2.442.632.823.06
C - Largeur hors tout (m)2.3352.3682.42.46
Volume de cuve (m3)14161821
Nombre de vis2222
Nombre de couteaux7×27×27×27×2
Nombre de pesons3333
Nombre d'essieux1×901×901×901×90
Largeur aux roues (m)2.3452.3452.3452.345
Pneumatiques445/50 R 19.5
si tapis longueur hors tout +0.87 m

MIXING – DISTRIBUTION

  • 2 conical vertical mixing screws equipped with 7 knives and an adjustable scraper.
  • Speed 540/1000 rpm resulting in 22/40 rpm at the screw.
  • Conical hoop with integrated overflow ring in the tank.
  • Fiber hoop.
  • 2nd scraper on each screw.
  • Epicycloidal angle drive reducer with oil bath fully immersed, without greaser, with 4 L charge reservoir.
  • 2 manual vertical counter-knives.
  • Front right tangential discharge hatch or rear left.
  • Front left control ladder (or rear center if front conveyor belt).
  • Self-sharpening tungsten carbide treated knives with anti-breakage support.
  • Tank, rolled, smooth in 2 parts to reduce the number of welds and increase its robustness.

DESIGN – SAFETY

  • Chassis integrated into the tank (narrow and low model).
  • DG 500 weighing, 3 sensors, Ø 73, 48 programs, 18 components with horn (2 sensors on the axle, 1 sensor on the hitch).
  • Protection covers.

CIRCULATION

  • Parking brake and hydraulic brake.
  • Lighting compliant with road regulations.
  • Manual stand.
  • Hitch on pin.
  • Equipment compliant with CE standards and approved by DREAL.

TRANSMISSION

  • Cardan transmission with protection and machine side protection bowl.

TRACTOR EQUIPMENT

  • 1 power take-off 540 rpm and 1000 rpm.
  • 1 12v/3-pin electrical socket for weighing.
  • 1 12v/7-pin electrical socket for lighting.
  • 1 DE hydraulic distributor for the hatch (attention to quantity if additional equipment).
  • 1 hitch pin.

DISTRIBUTION

  • Cone for loading concentrates (rear)
  • Tank raised for 2 screws (increases height by 0.30 m +3 m3)
  • Hydraulic offset of the conveyor belt 0.30 m to the right or left or offset 0.20 m to the right and left (1 DE)
  • Bilateral front conveyor belt pack chains and bars width 0.80 m (right or left distribution, 2-speed gearbox, control platform) (1 DE) – removes the side hatch and ladder
  • Banana front conveyor belt pack chains and bars width 0.80 m (distribution R and L, hydraulic offset 0.20 m maximum height 1 m, 2-speed gearbox, control platform) (1 DE) – removes the side hatch and ladder
  • Platform replacing the ladder
  • Inclined conveyor belt width 0.80 m for trough 0.60 m to 1.10 m with hydraulic offset on the inclined side of 0.30 m. Right or left inclination to be specified (1 DE)
  • Stainless steel conveyor belt width 0.80 m
  • PVC side conveyor belt long. 0.80 m, width 1.10 m, hydraulic inclination (2 DE)
  • Flat bilateral PVC conveyor belt width 0.80 m replacing chains and bars
  • Central rear discharge conveyor belt length 2.00 m, width 1.10 m, hydraulic lifting by 2 cylinders distribution H. 2.50 m
  • Bilateral rear discharge conveyor belt width 0.80 m – removes the front hatch (2 DE)
  • 2nd rear hatch R or other location (1 DE)

HYDRAULIC – ELECTRIC

  • Hydraulic stand with hand pump
  • 2-speed gearbox
  • MOTEC camera with screen
  • Additional MOTEC camera
  • Speed change by teleflexible screw box
  • Hydraulic speed change distributor tractor screw box (1 DE)
  • Electric speed change (1 additional function) Screw box
  • 2-function electrical distributor
  • Dual electrical control next to the conveyor belt (3 functions)
  • Electric flow regulator in cabin for discharge conveyor belt (1 direction)
  • Manual flow regulator for discharge conveyor belt (1 direction)
  • Hydraulic selector 2 or 3 function electric control for machine without conveyor belt (1 DE tractor)
  • Hydraulic flap on side hatch

CUTTING

  • 1 additional manual vertical knife
  • 2 hydraulic vertical knives replacing the 2 manuals (1 DE)
  • 1 additional manual horizontal knife
  • 1 additional hydraulic horizontal knife (1 DE)
  • 2 hydraulic knives for tubers and roots (1 DE)
  • Knife extension for long straw
  • 2nd scraper for mono-screw

SAFETY

  • Ferrite lower magnet for discharge through the side hatch – Attention to distribution height
  • Ferrite lower magnet for discharge through the conveyor belt – Attention to distribution height
  • Neodymium Fer lower magnet for discharge through the side hatch – Attention to distribution height
  • Neodymium Fer lower magnet for discharge through the conveyor belt – Attention to distribution height
  • Neodymium magnet under the coil 1 screw composed of 3 bars Ø33 mm L 300 mm
  • Rotary magnet
  • Upper magnet for conveyor belt model only

WEIGHING

  • Farm Chef application for smartphone allows remote modification of weighing box program
  • Battery with cord
  • Remote control box for weighing functions with screen and antenna – range 100 m
  • Battery charger for remote control box
  • Remote control of electrical distributor up to 12 m
  • Weighing repeater at rear or other location
  • Weighing data transfer to PC – DATA transfer
  • Light indicator in place of horn

TIRES

  • Spare wheel 445/50 R 19.5
  • 2 wheels 400/45 x 17.5 lower height by 40 mm compared to 445/50 R 19.5
  • 4 wheels (solid) twin 8.15 x 15 (200 x 710) lower height by 150 mm compared to 445/50 R 19.5 Incompatible with PVC side conveyor belt on mono-screw
  • 4 wheels (solid) twin 215/75 R 17.5 (219 x 779) lower height by 70 mm compared to 445 x 19.5

TRANSMISSION

  • Standard series 8 cardan with protection
  • 1/2 wide-angle cardan on tractor side with series 8 protection

MISCELLANEOUS

  • Electrically operated hydraulic stand
  • Side with 10 mm thickness – machine 1 screw / 2 screws / 3 screws
  • Stainless steel lining thickness 4 mm 1 screw / 2 screws / 3 screws belted on tank side height 0.60 cm
  • Additional electrical function on electrical distributor
  • Conveyor belt restrictor for barn
  • Hydraulic distribution roller on side hatch
  • Shoe replacing the stand
  • Supplement for 1st coil in 20 mm on 15 mm screw – unit
  • Supplement for 1st coil in 25 mm on 15 mm screw – unit
  • Supplement for 1st coil in 25 mm on 20 mm screw – unit
  • 20 mm bottom supplement
  • Supplement for vertical counter knives with double lower adjustment
  • Water incorporation hose
  • 20 mm thick screw (the screw)
  • Hardox screw
  • Hydraulic flap on front or rear side hatch

Photo gallery

Do you need information about a machine?

News

Jeulin becomes the exclusive importer of the Canadian manufacturer Anderson!

Jeulin becomes the exclusive importer of the Canadian manufacturer Anderson!

This beginning of 2024 marks a new milestone in the import activity of the Jeulin group, which is proud to announce its new collaboration with the Canadian agricultural machinery manufacturer Anderson. Recognized in the territory as one of the most reliable French manufacturers of agricultural breeding machinery for over 70 years, Jeulin began complementing its […]

Read more
Jeulin celebrates its 70th anniversary!

Jeulin celebrates its 70th anniversary!

Since 1953, JEULIN has been one of the preferred designers and manufacturers of agricultural and livestock equipment in France! Established in Blois and since 2017 in Coëx in Vendée, this company has continued to evolve. Over the decades, the company has expanded its range of products: silage cutter, silage and straw blower, straw blower, vertical […]

Read more