Eagle

Self-propelled mixers | Marque : Jeulin

Eagle is a self-propelled silage mixer feeder distributor available with 1 or 2 vertical screws equipped with a powershift mechanical transmission with varying screw speeds. Its compact shape and front-mounted engine make it a maneuverable and high-performing machine. Its silage auger, depending on additional equipment, is capable of working with all types of products without shredding them.


Are you interested in this model?

Technical specifications

1 Screw

Mixing – Distribution

  • Conical vertical mixing screw equipped with 9 knives and 1 scraper.
  • Conical hoop with integrated overflow ring in the tank
  • 2-speed screw rotation gearbox 22/40 rpm mechanical drive
  • Angle gearbox with oil bath and 4l charge reservoir.
  • 2 hydraulic vertical counter-knives
  • Bilateral front distribution conveyor belts with chains and bars width 0.60m
  • Control platform with staircase
  • DG 500 weighing system with 4 load cells, 24 programs, 18 components with horn

 

Silage – Loading

  • Front silage auger, 2m wide driven by a variable flow pump and Linde 450 bar – 140HP motor
  • 1 cylinder for lifting the silage arm with gas suspension (nitrogen ball)
  • Rubber conveyor belt with bars width 700mm hydraulic drive, scraper on the belt return and possibility of reversing the rotation direction
  • Hydraulic control protection cover for the auger

 

Design – Safety

  • NEF 206 hp Stage 5 diesel engine
  • Front-wheel drive by 1 piston motor and variable flow pump
  • Forward speed 12 km/h
  • Assisted rear steering
  • Front axle with hydraulic suspension, fixed rear axle
  • Left front cab with heating, ventilation
  • Cab mounted on mechanical suspensions
  • Upper door glass opens
  • Wide visibility, windshield wiper
  • Comfortable seat
  • Control of electrical functions by joystick integrated in the seat armrest

 

Traffic

  • Work light
  • Signaling lighting
  • Rotating beacon
  • Parking brake
  • Hydraulic brake on motor axle
  • CE standard and approved equipment

 

2 Screws

Mixing – Distribution

  • double conical vertical mixing screw equipped with 9 to 13 knives and 1 scraper.
  • Conical hoop with integrated overflow ring in the tank
  • 2-speed screw rotation gearbox 22/40 rpm mechanical drive
  • Angle gearbox with oil bath and 4l charge reservoir.
  • 2 hydraulic vertical counter-knives
  • Bilateral front distribution conveyor belts with chains and bars width 0.60m
  • Control platform with staircase
  • Weighing system, DG 500 with 4 load cells, 24 programs, 18 components with horn

 

Silage – Loading

  • Front silage auger, 2m wide driven by a variable flow pump and Linde 450 bar – 140HP motor
  • 1 cylinder for lifting the silage arm with gas suspension (nitrogen ball)
  • Rubber conveyor belt with bars width 700mm hydraulic drive, scraper on the belt return and possibility of reversing the rotation direction
  • Hydraulic control protection cover for the auger

 

Design – Safety

  • Stage 5 diesel engine mounted at the front of the machine
  • Front-wheel drive by 1 piston motor and variable flow pump
  • Forward speed 12 km/h
  • Assisted forward steering
  • Front axle with hydraulic suspension, fixed rear axle
  • Left front cab with heating, ventilation
  • Cab mounted on mechanical suspensions
  • Upper door glass opens
  • Wide visibility, windshield wiper
  • Comfortable seat
  • Control of electrical functions by joystick integrated in the seat armrest

 

Traffic

  • Work light
  • Signaling lighting
  • Rotating beacon
  • Parking brake
  • Hydraulic brake on motor axle
  • CE standard and approved equipment DREAL

LOADING

  • Stainless steel auger housing
  • Auger drum with double spiral
  • Interior lining of the auger channel in stainless steel
  • Iron support wheels for the auger
  • Stainless steel auger roller
  • Opening on the auger channel for bulk product loading
  • Suspensions with gas accumulators for the auger arm
  • Reduction for machines without auger
  • High-pressure 450 bars auger

 

DISTRIBUTION

  • Tank with 10mm thick sides instead of 8mm for double-screw machines
  • Tank with 10mm thick sides instead of 8mm for single-screw machines
  • Forage ring with upper pipe for water distribution
  • Reduction for machines without forage ring
  • 2nd hatch
  • Bilateral PVC unloading conveyor belt
  • Unloading conveyor belt with 2 motors
  • Movable unloading conveyor belt, one side raised height 1m
  • Raised unloading conveyor belt 1m
  • Extended unloading conveyor belt + rubber band from 1800mm
  • Extended unloading conveyor belt + rubber band from 1400mm
  • Extended unloading conveyor belt with chain + stainless steel bottom up to 1400mm
  • Extended unloading conveyor belt with stainless steel chain up to 1400mm
  • Extended unloading conveyor belt with chain + stainless steel bottom from 1800mm
  • Unloading conveyor belt – fixed extension L 800mm
  • Metal sheet for closing unloading conveyor belt
  • Hydraulic sheet for unloading conveyor belt
  • Hydraulic offset of the conveyor belt 40cm to the right or left
  • Rear bilateral unloading conveyor belt instead of front bilateral
  • Reduction for machines without bilateral unloading conveyor belt
  • Screws for 2nd scraper (per unit)
  • Screws with stainless steel edge – thickness 4mm (per unit)
  • Screws thickness 20mm (per unit)

 

HYDRAULIC-ELECTRIC

  • 2nd speed of forward movement 0-12 and 0-24 km/h
  • 2nd speed of forward movement 0-12 and 0-40 km/h – up to 24m3 – axle 238
  • 2nd speed of forward movement 0-12 and 0-40 km/h – over 24m3 – axle 238
  • Electric pedal drive
  • Rotating Magnet Hydraulic Adjustment
  • Electric speed regulator on unloading conveyor belt
  • Manual speed regulator on unloading conveyor belt
  • Hydraulic system 180HP
  • Pressure control gauge for hydraulic system
  • Hydraulic system for bulk product

 

BEDDING

  • Rear hydraulic-driven straw blower
  • Hydraulic cylinder on chute cap

 

CUTTING

  • Programmable automatic counter-knives
  • Hydraulic counter-knives
  • Reduction for machines without counter-knives

 

SAFETY

  • Rotating magnet
  • Neodymium magnet for unloading conveyor belt
  • Magnet on screws (per unit)

 

WEIGHING

  • Weight repeater with cable, Dinamica Generale model
  • Bluetooth weighing system DG800+ app Dinatel 3 instead of DG500
  • Bluetooth weighing system DG600 instead of DG500

 

TRANSMISSION / ENGINE

  • IVECO NEF 285HP 6CYL engine instead of 206HP 6CYL ST5
  • IVECO NEF 285HP 6CYL engine instead of 258HP 6CYL ST5
  • IVECO NEF 258HP 6CYL engine instead of 206HP 6CYL ST5
  • 4 directional wheels 12 km/h (+24 m3 – axle 238)
  • 4 directional wheels 24 km/h (+24 m3 – axle 238)
  • 4 directional wheels 40 km/h (+24 m3 – axle 238)
  • 4 directional wheels 40 km/h (up to 24 m3 – axle 238)
  • 4-wheel drive 12 km/h (+24 m3 – axle 238)
  • 4-wheel drive 24 km/h (+24 m3 – axle 238)
  • 4-wheel drive 40 km/h (+24 m3 – axle 238)
  • 4-wheel drive 40 km/h (+24 m3 – axle 238)
  • 4-wheel drive and directional 12 km/h (+24 m3 – axle 238)
  • 4-wheel drive and directional 24 km/h (+24 m3 – axle 238)
  • 4-wheel drive and directional 40 km/h (+24 m3 – axle 238)
  • 4-wheel drive and directional 40 km/h (up to 24 m3 – axle 238)
  • Hydraulic suspensions for rear axle
  • Hydraulic differential lock (for 4-wheel drive)

 

MISCELLANEOUS

  • Silent exhaust
  • Double camera (reverse+inside tank) with screen in the cabin
  • Additional camera
  • Mudguard (per unit)
  • LED work light
  • LED rotating beacon
  • Reversible fan for oil radiator
  • Air conditioning
  • Radio
  • Pneumatic seat
  • Heated rearview mirror (per unit)
  • Electrically folding rearview mirror (per unit)
  • Silent exhaust
  • Automotive
  • 2nd diesel tank
  • Kit for engine water heating
  • Kit for hydraulic oil heating
  • Pocket hopper (without screw)
  • Manual centralized greasing
  • Automatic centralized greasing
  • 3-point greasing ramp

Photo gallery

Do you need information about a machine?

These machines might interest you

News

Jeulin goes pink

Jeulin goes pink

JEULIN, goes pink and supports the fight againstbreast cancer!They are present in the agricultural world, but sometimes not very visible or recognized. However,women are essential drivers within farms and livestock farming. Often combininga double job, they mix work and passion on a daily basis. When illness invites itself into the lives ofthese farmers, these breeders […]

Read more
Jeulin becomes the exclusive importer of the Canadian manufacturer Anderson!

Jeulin becomes the exclusive importer of the Canadian manufacturer Anderson!

This beginning of 2024 marks a new milestone in the import activity of the Jeulin group, which is proud to announce its new collaboration with the Canadian agricultural machinery manufacturer Anderson. Recognized in the territory as one of the most reliable French manufacturers of agricultural breeding machinery for over 70 years, Jeulin began complementing its […]

Read more
Jeulin celebrates its 70th anniversary!

Jeulin celebrates its 70th anniversary!

Since 1953, JEULIN has been one of the preferred designers and manufacturers of agricultural and livestock equipment in France! Established in Blois and since 2017 in Coëx in Vendée, this company has continued to evolve. Over the decades, the company has expanded its range of products: silage cutter, silage and straw blower, straw blower, vertical […]

Read more